...........................................................................TO-92SIDACtor Data.......................................................................................

The TO-92 SIDACtor is a solid state protection device designed for telecommunications applications such as
modems, line cards, fax machines, etc.
The SIDACtor is used to help equipment meet various regulatory requirements including: GR 1089, ITU K.20 & K.21,
IEC 950, UL 1459 & 1950 and FCC Part68.
Electrical Parameters
Part Number* |
VDRM Volts |
VS Volts |
VT Volts |
IDRM µAmps |
IS mAmps |
IT Amps |
IH mAmps |
CO PF |
P0080E_ |
6 |
25 |
5 |
5 |
800 |
1 |
50 |
100 |
P0300E_ |
25 |
40 |
5 |
5 |
800 |
1 |
50 |
110 |
P0640E_ |
58 |
77 |
5 |
5 |
800 |
1 |
150 |
50 |
P0720E_ |
65 |
88 |
5 |
5 |
800 |
1 |
150 |
50 |
P0900E_ |
75 |
98 |
5 |
5 |
800 |
1 |
150 |
50 |
P1100E_ |
90 |
130 |
5 |
5 |
800 |
1 |
150 |
40 |
P1300E_ |
120 |
160 |
5 |
5 |
800 |
1 |
150 |
40 |
P1500E_ |
140 |
180 |
5 |
5 |
800 |
1 |
150 |
40 |
P1800E_ |
160 |
220 |
5 |
5 |
800 |
1 |
150 |
30 |
P2300E_ |
190 |
260 |
5 |
5 |
800 |
1 |
150 |
30 |
P2600E_ |
220 |
300 |
5 |
5 |
800 |
1 |
150 |
30 |
P3100E_ |
275 |
350 |
5 |
5 |
800 |
1 |
150 |
30 |
P3500E_ |
320 |
400 |
5 |
5 |
800 |
1 |
150 |
30 | |
* For individual “EA”, “EB” and “EC” surge ratings, see table below. (P0080EB is not available.)
Notes:
●All measurements are made at an ambient temperature of 25°C. IPP applies to -40°C through +85°C temperature range.
●IPP is a repetitive surge rating and is guaranteed for the life of the product.
●Listed SIDACtors are bi-directional. All electrical parameters & surge ratings apply to forward and reverse polarities.
●VDRM is measured at IDRM.
●VS is measured at 100V/µs.
●Special voltage (VS & VDRM) and holding current (IH) requirements are available upon request. |
●Off-state capacitance is measured at 1MHz with a 2 volt bias and is a typical value for “EA” and “EB” product. “EC” capacitance
is approximately 2x the listed value.
Surge Ratings
IPP 2x10µs Amps |
IPP 8x20µs Amps |
IPP 10x160µs Amps |
IPP 10x560µs Amps |
IPP 10x1000µs Amps |
ITSM 60Hz Amps |
dI/dt Amps/µs |
|
150 |
100 |
50 |
50 |
20 |
500 |
|
250 |
150 |
100 |
|
30 |
500 |
500 |
400 |
200 |
|
100 |
60 |
500 |
......................................................................Thermal Considerations.......................................................................................
Package |
Symbol |
Parameter |
Value |
Unit |
TO-92 |
Tj |
Junction Temperature Range |
-40 to +150 |
°C |
Ts |
Storage Temperature Range |
-65 to +150 |
°C |
Tc |
Maximum Case Temperature |
+110 |
°C |
Rθjc |
Thermal Resistance: junction to case |
+28 |
°C/W |
Rθja |
Thermal Resistance: junction to ambient |
+90 |
°C/W |
..............................................................................Package demensions................................................................................................
............................................................................Characteristic Curve........................................................................................
|